{
  "config": {
    "step": {
      "user": {
        "title": "Connect to Reticulum",
        "description": "Home Assistant will run a Reticulum instance and connect out to your Reticulum stack over TCP (the neighbouring machine must expose a TCPServerInterface).",
        "data": {
          "target_host": "Target host",
          "target_port": "Target port",
          "display_name": "Display name",
          "interface_name": "Interface name"
        },
        "data_description": {
          "target_host": "Hostname or IP of the machine running the Reticulum TCP server.",
          "target_port": "TCP port of the Reticulum TCPServerInterface (default 4242).",
          "display_name": "Name announced to other Reticulum peers for this Home Assistant.",
          "interface_name": "Label used for this connection in the Reticulum config."
        }
      }
    },
    "error": {
      "cannot_connect": "Could not reach the Reticulum TCP server at that host and port."
    },
    "abort": {
      "already_configured": "Reticulum is already configured.",
      "single_instance_allowed": "Only a single Reticulum instance is allowed."
    }
  },
  "options": {
    "step": {
      "init": {
        "title": "Reticulum options",
        "data": {
          "enable_assist": "Route incoming messages to Assist",
          "assist_agent": "Assist agent (entity id / agent id, blank = default)",
          "assist_language": "Assist language (blank = system default)",
          "allow_all_senders": "Reply to any sender",
          "allowed_identities": "Allowed sender addresses",
          "default_recipient": "Default recipient address (for the notify entity)",
          "greeting": "Greeting message",
          "delivery_method": "Default delivery method",
          "announce_interval": "Announce interval",
          "propagation_node": "Propagation node address",
          "sync_interval": "Propagation sync interval",
          "loglevel": "Reticulum log level (0-7)"
        },
        "data_description": {
          "enable_assist": "When enabled, incoming LXMF messages are answered by the Assist conversation agent and the reply is sent back over Reticulum.",
          "allowed_identities": "One address per line (or comma separated). Only used when 'Reply to any sender' is off.",
          "default_recipient": "16-byte hex LXMF address that the notify.reticulum entity sends to.",
          "announce_interval": "How often (seconds) to announce our address. 0 disables periodic announces.",
          "propagation_node": "Optional LXMF propagation node for store-and-forward delivery.",
          "sync_interval": "How often (seconds) to pull queued messages from the propagation node. 0 disables."
        }
      }
    }
  },
  "entity": {
    "sensor": {
      "lxmf_address": { "name": "LXMF address" },
      "messages_received": { "name": "Messages received" },
      "messages_sent": { "name": "Messages sent" },
      "messages_failed": { "name": "Messages failed" },
      "peers": { "name": "Known peers" },
      "last_message": { "name": "Last message" },
      "last_message_time": { "name": "Last message time" },
      "rx_bytes": { "name": "Received" },
      "tx_bytes": { "name": "Transmitted" },
      "bitrate": { "name": "Bitrate" },
      "rssi": { "name": "RSSI" },
      "snr": { "name": "SNR" },
      "link_quality": { "name": "Link quality" }
    },
    "binary_sensor": {
      "connected": { "name": "Connected" }
    },
    "button": {
      "announce": { "name": "Announce" },
      "sync": { "name": "Sync propagation node" }
    },
    "notify": {
      "message": { "name": "Message" }
    }
  },
  "selector": {
    "delivery_method": {
      "options": {
        "direct": "Direct (establish a link)",
        "opportunistic": "Opportunistic (single packet)",
        "propagated": "Propagated (store and forward)"
      }
    }
  },
  "device_automation": {
    "trigger_type": {
      "message_received": "Message received",
      "message_delivered": "Message delivered",
      "message_failed": "Message delivery failed",
      "announce_received": "Announce received (peer heard)"
    }
  },
  "services": {
    "send_message": {
      "name": "Send message",
      "description": "Send an LXMF message to a Reticulum destination.",
      "fields": {
        "destination": {
          "name": "Destination",
          "description": "16-byte hex LXMF destination hash of the recipient."
        },
        "content": {
          "name": "Content",
          "description": "The message body."
        },
        "title": {
          "name": "Title",
          "description": "Optional message title / subject."
        },
        "method": {
          "name": "Method",
          "description": "Delivery method to use."
        },
        "fields": {
          "name": "Fields",
          "description": "Optional advanced LXMF fields dictionary."
        }
      }
    },
    "announce": {
      "name": "Announce",
      "description": "Announce this Home Assistant's LXMF destination on the network."
    },
    "request_path": {
      "name": "Request path",
      "description": "Ask the network for a path to a destination.",
      "fields": {
        "destination": {
          "name": "Destination",
          "description": "Destination hash to resolve a path to."
        }
      }
    },
    "set_propagation_node": {
      "name": "Set propagation node",
      "description": "Set the outbound LXMF propagation node.",
      "fields": {
        "destination": {
          "name": "Destination",
          "description": "Propagation node destination hash."
        }
      }
    },
    "sync_propagation": {
      "name": "Sync propagation node",
      "description": "Pull queued messages from the configured propagation node.",
      "fields": {
        "max_messages": {
          "name": "Max messages",
          "description": "Maximum number of messages to retrieve."
        }
      }
    }
  }
}